22?Clevis

ART-PC

45?Clevis

ART-C45

60?Clevis

ART-C60

45?Static Clevis

ART-45SC

Airshore offers a variety of clevis attachments to meet the needs of any shoring situation.  The struts will not attach directly to any base plate or tripod head without a clevis.  Clevis' are offered in a variety of angles, and some are offered as static or pivot. The selection of clevis' includes a Pivot Clevis, 45 Degree Clevis, 45 Degree Static Clevis, 60 Degree Clevis, and a 60 Degree Static Clevis.Clevis

Attachments connect to baseplates and tripod heads.  They will add 2.5 inches to the length of the strut.

Static Clevis

ART-SC

5" Base Plate

ART-BP5

Rigid Base

ART-RB

Collapse situations are one of the most formidable challenges rescue workers encounter. Because of this, Airshore offerst for types of Strut heads to help you adapt to any resccue situation. Airshore offers swivels, a V-block, a flat base, and a rigid base. While the flate base fits inside light and heavy duty rails to support a trench wall, the rigid base is a non-swivel flat base that adds stability to vertical shores. When you only base support position is a corner, the V-block is will cradle and support the materials providing stabilization while swivel heads provide angled support.

Flat Base

ART-FB

Collapse situations are one of the most formidable challenges rescue workers encounter.  Because of this, Airshore offerst for types of Strut heads to help you adapt to any resccue situation.  Airshore offers swivels, a V-block, a flat base, and a rigid base.  While the flate base fits inside light and heavy duty rails to support a trench wall, the rigid base is a non-swivel flat base that adds stability to vertical shores.  When you only base support position is a corner, the V-block is will cradle and support the materials providing stabilization while swivel heads provide angled support.

Rhino Head Attachment

ART-RH

L-grip

ART-LG

Airshore offers a variety of grips for supporting and stabilizing of structural materials.  They are offered in various widths and an L grip is also available.  The grips are available in the following sizes:

• 4" C-Grip
• 6" C-Grip
• 8" C-Grip
• L-Grip

Grips provide support to beams, girders, rafters, joints, purloins and other horizontal structural members as well as vertical structural members.  The C-Grips wrap around three sides of the dimensional structural members.  The L-Grip grabs the corner.  Predrilled nail holes enable accurate placement of nails to increase stability.

15? Strut Swivel

ART-SL15

Chain Wedge

ART-CW

4" C-grip

ART-CG4

Airshore offers a variety of grips for supporting and stabilizing of structural materials.  They are offered in various widths and an L grip is also available.  The grips are available in the following sizes:

• 4" C-Grip
• 6" C-Grip
• 8" C-Grip
• L-Grip

Grips provide support to beams, girders, rafters, joints, purloins and other horizontal structural members as well as vertical structural members. The C-Grips wrap around three sides of the dimensional structural members. The L-Grip grabs the corner. Predrilled nail holes enable accurate placement of nails to increase stability.

23? Strut Swivel

ART-S23

Point Attachment

ART-PT

6" C-grip

ART-CG6

Airshore offers a variety of grips for supporting and stabilizing of structural materials.  They are offered in various widths and an L grip is also available.  The grips are available in the following sizes:

• 4" C-Grip
• 6" C-Grip
• 8" C-Grip
• L-Grip

Grips provide support to beams, girders, rafters, joints, purloins and other horizontal structural members as well as vertical structural members. The C-Grips wrap around three sides of the dimensional structural members.  The L-Grip grabs the corner.  Predrilled nail holes enable accurate placement of nails to increase stability.

45? Pivot

ART-P45

Airshore pivots are used in raker rail systems for collapse situations.  Pivots are an integral part of the search and rescue kit.  They are available in two different configurations:

• 45 degree
• 60 degree

A pivot allow rescuers to angle raker struts, vertical shores, and bases to accommodate for uneven terrain.

V-Block

ART-VB

Collapse situations are one of the most formidable challenges rescue workers encounter.  Because of this, Airshore offerst for types of Strut heads to help you adapt to any rescue situation.  Airshore offers swivels, a V-block, a flat base, and a rigid base.  While the flate base fits inside light and heavy duty rails to support a trench wall, the rigid base is a non-swivel flat base that adds stability to vertical shores.  When you only base support position is a corner, the V-block is will cradle and support the materials providing stabilization while swivel heads provide angled support.

8" C-grip

ART-CG8

Airshore offers a variety of grips for supporting and stabilizing of structural materials.  They are offered in various widths and an L grip is also available.  The grips are available in the following sizes:

• 4" C-Grip
• 6" C-Grip
• 8" C-Grip
• L-Grip

Grips provide support to beams, girders, rafters, joints, purloins and other horizontal structural members as well as vertical structural members. The C-Grips wrap around three sides of the dimensional structural members. The L-Grip grabs the corner. Predrilled nail holes enable accurate placement of nails to increase stability.

60? Pivot

ART-P60

Airshore pivots are used in raker rail systems for collapse situations.  Pivots are an integral part of the search and rescue kit.  They are available in two different configurations:

• 45 degree
• 60 degree

A pivot allow rescuers to angle raker struts, vertical shores, and bases to accomodate for uneven terrain.