With controllers one basically differentiates between a fitting design and a dead man switching design. The standard controllers are supplied as 5 section, 10 section oder 17 section devices. There are two types of 10 section and 17 section controllers: the controller with contour chamber regulation and those without this facility.
The controllers with contour chamber regulation have an adjustable pressure regulator integrated for 0.1 to 0.5 bar (1.45 to 7.25 psi) enabling constant pressure in the divided contact chambers. There are either 2 or 3 contact chambers depending on the size of the bag.
In order to inflate the larger bags two controllers are connected together via a connection hose to form one unit owing to the number of chambers involved. For this, there is a controller without contour chamber regulation for the lower chambers and a controller with regulation for the upper chambers.
1.0 bar/14.5 psi OR 0.5 bar/7.25 psi:
- 5-section, fitting (Part # 0351000100 or 0350002700)
- 10-section, fitting (Part # 0351000200 or 0350002900)
- 10-section, fitting with 3 contour chambers (Part # 0351000300 or 0350003200)
- 17-section, fitting with 2 contour chambers (Part # 0351000400 or 0350005000)
- 17-section, fitting with 3 contour chambers (Part # 0351000500 or 0350027700)
- 10-section, dead man (Part # 0351000701 or 0350003801)
- 10-section, dead man with 3 contour chambers (Part # 0351000601 or 0350005000)
- 17-section, dead man with 3 contour chambers (Part # 0351000800 or 0350004201)
- 17-section, dead man with 2 contour chambers (Part # 0351000901 or 0350024801)
|
