High Pressure Leak Sealing

When fire services have to deal with hazardous materials in companies producing and processing materials which are dangerous for water and the environment, it is very often the case that existing materials and equiptment reach their limits with respect to sealing.

Sealing of leaks on pressurized pipelines, structural parts and fittings is not possible, or very difficult, using standard Leak Sealing Bags.

A sealing hose system was developed in cooperation with the Industrial Fire Brigade of Henkel KGaA Düsseldorf. This system enables sealing of positions which are difficult to access and which have operating pressures of up to a maximum of 10 bar (145psi).

It has very good adaption characteristics to the various pipe diameters due to the different hose lengths.

There are two set variations supplied: Premium Set and Base Set. Both sets are contained in a practical transport case and are easy to use.

Premium Set

1500015800
USA Part # 1500019100

• 1 Sealing hose, 1.5 m (59 in.)
• 1 Sealing hose, 2.5 m (98 in.)
• 1 Sealing hose, 3.5 m (138 in.)
• 1 inflation valve for sealing hose
• 1 Inflation hose for sealing hose
• 1 Pressure regulator 200/300 bar (3,000/4,500 psi) (not in USA version)
• 1 Pressure regulator 4,500 psi (only in USA version)
• 1 Sealing plate, Nitrile Butadiene Rubber, 150 x 210 mm (6 x 8 in.)
• 1 Sealing plate, Ethylen Propylen Dien Rubber, 150 x 210 mm (6 x 8 in.)
• 1 Sealing plate, Fluoropolymer Rubber, 150 x 210 mm (6 x 8 in.)
• 1 Transport case for Premium set 600 x 400 x 135 mm (24 x 16 x 5.5 in.)
• 1 Air escape valve for High-Pressure Leak Sealing System

Base Set

1500019000

• 1 Sealing hose, 2.5 m (98 in.)
• 1 Inflation valve for sealing hose
• 1 Inflation hose for sealing hose
• 1 Sealing plate, Fluoropolymer Rubber, 150 x 210 mm (6 x 8 in.)
• 1 Transport case for Base Set 400 x 300 x 183 mm (16 x 12 x 7 in.)
• 1 Air escape valve for High-Pressure Leak Sealing System