Pipe Sealing Sleeves

1/2" Part # 1500002300 3/4"
Part # 1500002400 1"
Part # 1500002500 1 1/4"
Part # 1500002600 1 1/2"
Part # 1500002700 2"
Part # 1500002800 2 1/2"
Part # 1500002900 3"
Part # 1500003200 4"
Part # 1500003300

Small cracks and holes in the pipeline system can cause considerable damage where there are aggressive liquid leaks. The frequent answer to this problem is the Vetter Pipeline Sealing Sleeve. They enable mechanical sealing to be made on pressurized pipelines up to 16 bar (232 psi). Even leaks in the smallest pipe nominal size of 1/2" can be sealed without difficulty.

This is how it works:

• position the inside of the sealing next to the leak
• place the sealing sleeve over it
• adjust the screws so that the pipe sealing sleeve can be moved over the leak
• tighten the Allan screws
• problem solved

Leak Sealing Paste

1500004600

The ideal first aid bandage for sealing leaks in difficult positions on the smallest valve sockets and flanges of pipeline systems in which chemical or petrochemical products flow, e.g. oil, petrol, hydrocarbon, alkali solutions and acids, solvents and cleaning agents.

This paste cannot be used with water leaks because it is water soluble.

The set for the Leak Sealing Paste consists of eight 500 ml (0.02 cu.ft.) tins.